These keyless clamping devices Recca 04 are designed to provide optimum radial and axial concentricity. Similar to the design of the Recca 05, but increased in length to provide better support and to reduce stress on the shaft and hub. These devices must always be installed in the hub to ensure optimum concentricity. The hub moves axially during the clamping operation.
Keyless Clamping Devices Feature | RECCA 04 |
---|---|
Self-centering | Y |
Not self-centering | |
Min. radial dimensions | |
Rapid maintenance and assembly | Y |
Medium-to-low torque | |
Medium-to-high torque | |
High torque | Y |
Self-locking | Y |
Non self-locking | |
Shaft install tolerance | H8 |
Hub install tolerance | H8 |
TOLLOK TLK130, BONFIX CCE4000, Chiaravalli RCK70, BEA BK70, SATI KLDA, SIT Type 5A, COMPOMAC Conex D, MAV 6901, ITALBLOCK CN54/N, Poggi CAL-D, KINLOK LOK20A, KTR KTR200, RINGBLOK 1300.1, BIKON 1003/7000A, Ringfeder RFN7013.0, RINGSPANN RLK130, VBLOK VK700, ECOLOC 7004, PETER GERWAH PSV2007, CHINA STANDARD Z3, CHALLENGE 04, SKF FX41, FENLOCK FLK130
Keyless clamping device connects one or two components parts solidly to the drive shaft, which allows motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps to be eliminated, thereby ensuring greater precision of the keyed components without requiring high precise tolerances. The thrust cones develop a pressure between the shaft and the hub by tightening clamping screws, which is capable of transmitting much higher torques than conventional keyway connection. The easy assembly and disassembly features give users many advantages, leading to further cost-saving. Suitable to connect any type of hub including flywheels, chain wheels, gears, levers, pulleys, eccentrics, couplings, etc.