Locking assembly Recca 02 is designed to fit into small diameter hubs. The min bore is available for shaft diameters down to 6mm. Suitable for assemblies on hubs with thin walls guarantees both axial and radial positioning precision with medium transmission torque. It is particularly suited to light torque applications. Spacer ring prevents axial movement during clamping, and design ensures nice performance of concentricity. For correct operation of these units, the hub diameter should be bigger than the flange diameter at least, even though with many materials stress limits would allow selection of smaller hub diameters.
|Locking Assembly Feature||RECCA 01|
|Min. radial dimensions||Y|
|Rapid maintenance and assembly||Y|
|Shaft install tolerance||H8|
|Hub install tolerance||H8|
TOLLOK TLK110, BONFIX CCE1000, Chiaravalli RCK80, BEA BEA BK80, SATI KLCC, SIT Type 3, COMPOMAC Conex B, MAV 5061, ITALBLOCK CN55, Poggi CAL-B, KINLOK LOK10, KTR KTR250 RINGBLOK 1100, BIKON 8000, Ringfeder RFN7110, RINGSPANN RLK110, VBLOK VK800B 03, ECOLOC 7110, PETER GERWAH PSV2010.1, CHINA STANDARD Z11, TSUBAKI TF, CHALLENGE 02, SKF FX20, FENLOCK FLK110, B-LOC B800
Shaft locking assembly connects one or two components parts solidly to the drive shaft, which allows motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps to be eliminated, thereby ensuring greater precision of the keyed components without requiring high precise tolerances. The thrust cones develop a pressure between the shaft and the hub by tightening clamping screws, which is capable of transmitting much higher torques than conventional keyway connection. The easy assembly and disassembly features give users many advantages, leading to further cost-saving. Suitable to connect any type of hub including flywheels, chain wheels, gears, levers, pulleys, eccentrics, couplings, etc.