Keyless Locking Devices Recca 01 is the original type of shaft clamping element and has been proven in a wide range of applications for more than 20 years. Recca 01 is suitable for general applications, it is not self centring and therefore requires a centring band to ensure perfect concentricity. It operates with medium- high torque values, which can be increased by installing in series. The unit will not move axially when clamped and will generally release automatically when the set screws are relaxed.
| Keyless Locking Devices Feature | RECCA 01 |
|---|---|
| Self-centering | Y |
| Not self-centering | |
| Min. radial dimensions | |
| Rapid maintenance and assembly | Y |
| Medium-to-low torque | |
| Medium-to-high torque | Y |
| High torque | |
| Self-locking | |
| Non self-locking | Y |
| Shaft install tolerance | H8 |
| Hub install tolerance | H8 |
TOLLOK TLK200, BONFIX CCE2000, Chiaravalli RCK40, BEA BK40,SATI KLGG,SIT Type 1, COMPOMAC Conex A, MAV 2005, ITALBLOCK CN210, Poggi CAL-A, KINLOK LOK30, KTR100/KTR101, RINGBLOK 1120, BIKON 4000, Ringfeder RFN7012, RINGSPANN RLK200, TAS -Schafer TAS 3020, VBLOK VK400, CHINA STANDARD Z2, KANA 200, TSUBAKI AS, CHALLENGE 01, SKF FX10, FENLOCK FLK200, B-LOC B400
Shaft locking assemblies connects one or two components parts solidly to the drive shaft, which allows motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps to be eliminated, thereby ensuring greater precision of the keyed components without requiring high precise tolerances. The thrust cones develop a pressure between the shaft and the hub by tightening clamping screws, which is capable of transmitting much higher torques than conventional keyway connection. The easy assembly and disassembly features give users many advantages, leading to further cost-saving. Suitable to connect any type of hub including flywheels, chain wheels, gears, levers, pulleys, eccentrics, couplings, etc.
